ResMed S9 Series Quick Start Manual

Filling the water tub
1. Slide the latch and lift open the flip lid.
2. Remove the water tub.
3. Fill the water tub (through the center hole) with distilled or deionized water up to the
maximum water level mark (380 mL).
4. Return the water tub to the H5i.
5. Close the flip lid ensuring that it clicks into place.
1 2
Manufacturer: ResMed Ltd 1 Elizabeth Macarthur Drive Bella Vista NSW 2153 Australia. Distributed by: ResMed Corp 9001 Spectrum Center Boulevard San
Diego CA 92123 USA. ResMed (UK) Ltd 96 Milton Park Abingdon Oxfordshire OX14 4RY UK. See www.resmed.com for other ResMed locations worldwide.
For patent information, see www.resmed.com/ip
S9, H5i, ClimateLine, AutoSet, S9 Elite, Escape, Escape Auto and EPR are trademarks of ResMed Ltd. S9, ClimateLine, AutoSet, Escape and EPR are registered in U.S.
Patent and Trademark Office.
© 2013 ResMed Ltd. 368266/5 2013-02
Global leaders in sleep and respiratory medicine
3
4 5
www.resmed.com
AutoSet / AutoSet
™ ™
Escape Auto / Escape
™
POSITIVE AIRWAY PRESSURE DEVICES
H5i / H5i for Her
™ ™
HEATED HUMIDIFIER
Quick Setup Guide
English
LCD screen
Home menu
Start/ Stop
button
Starts or stops
treatment.
view your sleep
S9 basics
The control panel of your S9 device includes an
LCD screen as well as a Start/Stop button, Push
dial and the Info and Setup menu keys.
for Her / Elite /
™
™
Setup menu
Allows you to
make changes
to settings.
Info menu
Allows you to
statistics.
Push dial
Turning the dial
allows you to
scroll through the
menu and change
settings. Pushing the
dial allows you to
enter into a menu and
confirm your choice.
Key:
Home
Humidity
level
Ramp
Heated
tube
Climate
Control
Start/
Stop
Push
dial
Setup
menu
Info
menu