Adding Another Recording (2)-Record Vocals On Track 3 - Tascam DP-004 Owner's Manual

2–Quick Start Guides
NOTE
You do not need to change the input if you want to
record the lead guitar on track 3.
4 Press the key to return to the Home Screen.
HOME
5 Press the
TRACK 2 REC
that the track is in record standby.
6 Press the key while pressing and holding the
Ô
stop ( ) key to return to the beginning of the song.
ª
Press the playback (
Á
guitar track while you practice the lead part. Both
guitar parts can be heard through the headphones.
7 Use the track knobs,
LEVEL
dial to adjust the output volume and the
VOLUME
balance between the tracks.
8 Return to the start of the track again and press the
playback ( ) key while pressing and holding the
Á
record ( ) key to start recording. The
–
key stops blinking and stays lit constantly.
22
TASCAM DP-004
key. The key blinks showing
) key to listen to the rhythm
knob and
MASTER LEVEL
TRACK 2 REC
You are recording again. Play your guitar!
9 When you are finished, press the stop (
stop recording.
10 Press the
TRACK 2 REC
Adding another recording (2)—record vocals
on track 3
1 Press to open the
ASSIGN
2 Press the (¶) key to select
F4
current input channel from the default of
) key to
ª
key again. Its light turns off.
screen.
INPUT ASSIGN
to change its
TRACK 3
.
IN A