Tascam DP-004 Owner's Manual page 29

5
UN/REDO key and indicator
Press this to undo the last action. Press again to redo
it. (See "Undoing operations (undo)" on page 66.)
Press this key while pressing and holding the
key to open the
( · )
HISTORY
undo multiple steps.
This indicator lights when one or more operations
that have been undone can still be redone.
6
LCD Display
This shows the Home Screen and various other
screens. (See "Display screens" on page 39.)
The display contrast can be changed using the
screen. (See "Setting the contrast" on
PREFERENCE
page 46.)
7
INPUT SETTING key
Press this key to open the
where you can select the input source. (See "Selecting
the input source" on page 54.)
8 INPUT A and INPUT B LEVEL knobs and OL indicators
Use these knobs to adjust the input levels for
and . (See "Making the first recording" on
A INPUT B
page 58.)
If the input source level is too high its
indicator lights. Moreover, even if the input level is
suitable, the indicator might light if the
OL
knob is turned past 2 or 3 o'clock.
3–Names and Functions of Parts
STOP
screen where you can
screen
INPUT SETTING
INPUT
(overload)
OL
LEVEL
9
ASSIGN key
Press this key to open the
you can assign the A and B input channels to tracks.
An assigned channel becomes the recording signal
source for its track. (See "Assigning input channels"
on page 57.)
0
MASTER LEVEL knob
Adjusts the monitoring level of the stereo output
signal.
This knob also adjusts the recording level when
performing a bounce or mix down.
q Track
PAN knobs
Use these knobs to adjust the panning of each track
in the stereo mix. (See "Stereo position (panning)" on
page 62.)
w Track
LEVEL knobs
Use these knobs to adjust the playback levels of each
track. (See "Level and balance" on page 62.)
e Track
REC keys and indicators
Press a key to put a track in recording standby
REC
mode (the key flashes). Pressing the key again
cancels recording standby mode. If you press the
key while holding down the
PLAY (¥)
key, recording will begin on every track in recording
standby mode (the
REC
screen where
INPUT ASSIGN
RECORD (–)
indicator lights).
TASCAM DP-004
29