Tascam DP-004 Owner's Manual page 59

For example, if you press the
track 2 and track 3 in that order, track 1, which
was pressed first, will no longer be in record
standby, but track 2 and track 3, which were
pressed afterwards, will be in record standby.
2 Set the recording level. Turn the (
) knob to adjust the input level of the input
B LEVEL
channel. Watch the display meters and the
indicator above and to the left of the
while setting the level suitably. At the same time,
confirm that sound heard from the headphones is
not distorted.
NOTE
The meter for the track that the input signal is assigned
to moves simultaneously with the corresponding input
meter (A or B).
OL indicator
The indicator lights if the input is too loud. If
OL
keys for track 1,
REC
or
INPUT A INPUT
OL
knob
LEVEL
6–Basic Recording
the indicator stays lit even when you lower the
OL
knob, lower the output level on the signal
LEVEL
source connected to the input.
Overload
warning bar
3 Press the playback (Á) key while pressing and
holding the record (–) key. Recording starts and
the record (–) key indicator lights red. The track
indicator changes from blinking to lit.
REC
4 Press the stop (ª) key to stop recording.
5 To return to the starting point of the recording,
press the  key while pressing and holding the
stop (ª) key. (This is the Last Recording Point
(LRP) function.)
To go to the beginning of the song (00:00:00:00),
press the Ô key while pressing and holding the
stop (ª) key. (This is the Return To Zero (RTZ)
function)
6 Press the playback (Á) key to play the recorded
59
TASCAM DP-004