Tascam DP-004 Owner's Manual page 23

3 Turn the wheel to set the input to
DATA
NOTE
By default, INPUT B is set as the recording source for
tracks 2 and 4, so you do not need to change the input if
you want to record the vocal on track 4.
4 Press the key to return to the Home Screen.
HOME
5 Press the
TRACK 3 REC
that the track is in record standby.
6 Use the channel
INPUT B
mic input level. Set the
channel indicator does not light even
INPUT B OL
when the loudest sound to be recorded is input.
.
IN B
key. The key blinks showing
knob to adjust the
LEVEL
knob so that the
LEVEL
2–Quick Start Guides
NOTE
If the indicator continues to light even when the
OL
knob is turned down, the mic signal itself is
LEVEL
too loud. In this case, if the input setting is
, change it to
B-Hi gh INT . MIC B-Mid
the input setting is
INT . MIC B-Mid
. If the indicator continues to light even
OL
MIC B-Low
when set to
INT . MIC B-Low
away from the mic or lower the volume at the sound
source.
The input level of built-in
meter on the screen.
INT . MIC
or
INT . MIC B-Low
, change it to
INT .
, move the sound source
is shown by the
MIC B
TASCAM DP-004
. If
B
23