Stiga MP2 504 Series Operator's Manual page 129

Pedestrian controlled lawnmower
Hide thumbs Also See for MP2 504 Series:
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 117
2.
The engine runs
irregularly, lacks power 
when revved or cuts 
out whilst working.
3.
If the engine floods.
4.
The cut grass is
not collected in the
grass catcher.
5.
Mowing is difficult.
6.
Excessive noise and/or 
vibration is experienced 
whilst working.
15. ATTACHMENTS ON REQUEST
15.1
"MULCHING" KIT
It cuts the grass cuttings finely and leaves them on 
the lawn, instead of collecting them in the grass 
catcher (for compatible machines) (Fig.26.0).
Air filter clogged.
Dirty spark plug or incorrect 
distance between the electrodes.
Carburetion problems.
The manual starter handgrip 
has been used repeatedly 
with the starter inserted.
The manual starter handgrip 
has been used repeatedly with 
the spark plug cap removed.
The cutting means has collided with a 
foreign object and received a knock.
The inside of the chassis is dirty.
The cutting means is not 
in good condition
Damaged or loose parts.
The pin on the cutting means 
has slipped out of its seat.
Cutting means fittings are loose or 
the cutting means is damaged.
Clean and/or replace the filter 
(Consult the engine manual).
Check the spark plug (Consult 
the engine manual).
Contact the authorised service centre.
Check the engine manual.
Insert the spark plug cap and 
try to start the engine.
(Check the engine manual).
Turn off the engine and disconnect 
the spark plug cap.
Inspect for damage and contact a Technical 
service centre for the replacement of the 
cutting means if necessary (par. 8.1).
Clean the inside of the chassis to
ease the grass discharge towards 
the grass catcher (par. 7.4.2).
Contact a Technical service centre
for the sharpening or replacement 
of the cutting means.
Stop the machine and disconnect 
the spark plug cable (Fig.24.0).
Inspect for damage.
Check for and tighten any loose parts.
Have all checks, repair work and replacements 
carried out by an Authorised Centre only.
Turn off the engine and disconnect 
the spark plug cap (Fig.24.0).
Contact an authorised Technical
Assistance Centre for checks, 
replacements or repairs (par. 8.1).
EN - 13

Advertisement

Table of Contents
loading

This manual is also suitable for:

Mp2 554 seriesMp2 504 roller seriesMp2 554 roller series

Table of Contents