Return Message Schedule - NEC Univerge SV9300 Series User Manual

RETURN MESSAGE
SCHEDULE
This feature allows terminal user to register a
return schedule when leaving the office and have
the schedule display on the calling terminal LCD.
The feature access code/feature key is set by
system data setting at initial installation. For
details, please contact the system
administrator.
TO SET
1. Press Speaker key.
You will receive a dial tone.
Speaker key lamp lights red. →
2. Dial Return Message Schedule
access code or press Return
Message Schedule feature key.
4:26 PM MON 11 MAY 2015
Recall PICK >>>>
TO CANCEL
86
FEATURE OPERATION
3. Dial the number corresponding to
desired message.
Message Patterns
DIAL
0 IN: BACK
1 OUT: BACK
2 AWAY: BACK
3 VACATION
• Press or
IN:BACK
4:26 PM MON 11 MAY 2015
Recall PICK
• Press or
date (Example: for June, 8, enter
"0608").
AWAY:BACK
4:26 PM MON 11 MAY 2015
Recall PICK
4. Press Speaker key.
Speaker key lamp goes off. →
Return Message Schedule is registered.
1. Press Speaker key.
You will receive a dial tone.
Speaker key lamp lights red. →
2. Dial Return Message Schedule
cancel code.
3. Press Speaker key.
Speaker key lamp goes off. →
MESSAGE
HH: MM
HH: MM
MM: DD
MM: DD
and dial desired time.
>>>>
and dial the month and
>>>>