NEC Univerge SV9300 Series User Manual page 12

NO. NAME
(3) Speaker
(4) Dial keypad
(5) Hold key
(6) Transfer key
(7) Speaker key (with light)
(8)
Cursor key
(9)
Menu key
(10) Mic key (with light)
(11) Answer key (with light)
(12) Feature key (with light)
(13) Recall key
(14) Programmable keys (with
light)
(15)
(16)
Help key
(17) LCD
(18) Call Indicator Lamp
(19) Scroll key
Originating a call with handsfree.
Dial the called party number or feature access code.
To place a call on hold.
Allows the terminal user to transfer established calls to another termi-
nal, without attendant assistance.
To control the built-in speaker which can be used for handsfree dialing
or monitoring.
This key is used as cursor-movement key (Up/Down/Right/Left Key) on
the Menu screen.
And determine the selected item in the Menu screen (Center Key).
Also, this key is used for the following operations.
Volume (UP/DOWN) key
Used to adjust speaker/receiver volume, and ringer volume.
Right key (Directory)
Press this key to open the Directory menu.
Left key (Redial)
Press this key to activate Redial feature. Press Redial and scroll
back through numbers that have been dialed. When the desired
number is displayed, press
To access the menu of terminal.
To respond handsfree. LED lights during speakerphone operation.
When LED on this key is lit, press this key to answer the incoming call.
To activate features such as terminal setup and to program One-Touch
Speed Calling keys.
To finish a call and hear the dial tone to make an another call.
These keys can be programmed as Flexible line key/Programmable
feature key by system administrator.
Soft keys The feature name is shown at the bottom of the LCD. The appropriate
feature key is displayed on the screen according to the call handling
process.
To call up explanations of the Soft keys on the LCD.
To display date or dialed number etc.
The lamp at the top corner of display flashes when a call terminates to
the terminal.
To switch the page number of screen showing programmable key.
For ITY-8LDX terminal, this key can not be used since it supports up to
8 keys.
4
INTRODUCTION
FUNCTION
or to activate dialing.