Hygiene Drying Function; Filling The Water Bucket - LG SIGNATURE AM50GYWN2 Owner's Manual

Hygiene Drying Function

The Hygiene Drying function is turned on by default. After
Humid Purify mode is used, the Hygiene Drying function
runs the fan for 1 – 1 ½ hours to dry the water bucket filters
and prevent the buildup of mold or bacteria.
• When the Hygiene Drying function is running,
drying) appears in the status display panel.
• To turn off the Hygiene Drying function, press and hold
the Off Timer and Light buttons for about 3 seconds.
• The Hygiene Drying function should not be turned off.
Turning off the Hygiene Drying function may result in a
buildup of mold, bacteria, and odor.
Off Timer
At the same time
for about 3 seconds
Note
• The Hygiene Drying function can be turned on or off by
pressing and holding the Off Timer and Light buttons for
3 seconds.
• The product must be running in order to turn the Hygiene
Drying function on or off.

Filling the Water Bucket

You can pour the water into the water bucket directly or
through the Easy Fill Inlet.
(hygiene
Please be sure to use purified water.
Using the Easy Fill Inlet
To use, turn off the product, fill a container with water, and
slowly pour the water into the inlet in the center of the top
cover. Add water gradually until a chime sounds and the
Full Water icon
• The water level indicators light up and chimes sound
• The capacity of the water bucket is 3.2 liters.
Light
• Plug in and turn OFF the product before using the Easy
• Do not fill the water bucket with the top cover flipped
• If water overflows the water bucket, there is a risk of
Caution
is lighted in the water level indicator.
more and more quickly as the bucket gets close to full.
Caution
Fill inlet.
over.
electric shock or property damage. Pour water into the
Easy Fill inlet slowly, paying attention to the chimes. Stop
pouring immediately when the Full Water
appears.
indicator
25