Purify Mode; Humid Purify Mode - LG SIGNATURE AM50GYWN2 Owner's Manual

Purify Mode

This mode cleans and freshens indoor air.
1
Press the Start/Stop button on the machine or the
remote controller.
2
Press the Mode button to select an operating mode.
• Press the button repeatedly to cycle through the
operating modes from Purify → Humid Purify →
Silent.
• The mode shows in the status display panel.
Note
• When the product is turned on for the first time, the default
operating mode is Purify mode.
• The last operating mode is stored, even after power is lost.
• During the first 30 seconds after the product is started,
appears in the display to indicate that the sensor is
stabilizing. After the sensor stabilizes, the display shows
the dust concentration level.

Humid Purify Mode

This mode improves indoor air using the humidifier and the
air purifier.
1
Fill the water bucket before starting Humid Purify mode.
• For details, refer to page 25.
2
Press the Start/Stop button on the machine or the
remote controller.
3
Press the Mode button to select Humid Purify mode.
• Press the button repeatedly to cycle through the
operating modes from Purify → Humid Purify → Silent.
• The mode shows in the status display panel.
Note
• The humidifier uses fine particles, so the spray from the
air outlet is not visible.
• The UV LED Lighting Water Treatment will run automatically
for some time during Humid Purify mode to prevent the
buildup of bacteria and mold in the water bucket. When the
UV LED Lighting Water Treatment is running, UV appears in
the display.
• In Humid Purify mode, the current humidity level appears in
the status display panel.
• If Humid Purify mode is stopped, the Hygiene Drying
function will run automatically for 1 to 1 ½ hours depending
on the humidity level of the indoor air.
• For best results, use the Hygiene Drying function when using
Humid Purify mode. For details, Refer to page 25.
• Leave the product plugged in for at least 1 ½ hours after
using Humid Purify mode to allow the Hygiene Drying
function to work.
• Water drops may form on the product window when you
activate Humid Purify mode. Initially, the water drops
may be small but grow bigger and flow down as you use
the product longer. This is the same natural phenomenon
as water drops forming on windows when it rains.
19