Table of Contents
Advertisement
Problem
Water bucket filters are not
assembled properly.
The water bucket filters are dirty
or clogged.
The water bucket level
does not change during
The Watering Engine™'s holes
Humid Purify mode.
are clogged.
It is raining or it is cold indoors.
The holes in the Watering
The air quality
Engine™ are clogged.
window is not clear or
condensation is not
forming during Humid
The air quality window is dirty.
Purify mode.
Room is too large.
Water bucket is empty.
Humidity level does not
rise.
Dirt has built up on the water
bucket filters.
Displayed humidity
Different measuring methods, or
level does not agree
air circulation.
with another device.
Possible Causes
Solution
• Properly assemble the top and side water
bucket filters in the water bucket.
• Clean the water bucket filters. Refer to page
31.
• Clean the Watering Engine™. Refer to page
37.
• The humidifier uses less water so the
amount of water in the bucket decreases
slowly.
• Clean the Watering Engine™. Refer to page
37.
• Clean the inside and outside of the window
on the water bucket using the ultra-fine
cloth provided. Refer to page 31.
• Use in a smaller or more enclosed area.
• Fill the water bucket.
• Clean the water bucket filters. Refer to page
31.
• The product measures and displays
the relative humidity according to the
temperature. The humidity measured by
a hygrometer or by two products, even
in the same space, may differ because
of installation height, air circulation, or
temperature difference.
41
Advertisement
Table of Contents
