Emptying The Water Bucket - LG SIGNATURE AM50GYWN2 Owner's Manual

Pouring Water into the Water
Bucket
If you want to add a large amount of water at once, pour the
water into the water bucket directly.
1
Detach the water bucket from the product and remove
its filter from the water bucket.
• For more information on how to detach the filter
from the water bucket, refer to Maintenance on
page 30 and 32.
2
Fill the water bucket to the FULL line on the inside of
the bucket.
Inside water bucket
3
Mount the water bucket on the product.
• For more information on how to mount the water
bucket, refer to Assembling Water Bucket on
page 33.
26

Emptying the Water Bucket

To empty the water bucket, turn off and unplug the product.
Remove the top cover and lift out the water bucket. Place
the bucket on a waterproof surface. Remove the top and
side water bucket filters from the bucket. Tilt the bucket to
empty it.
• The bucket empties from the slots midway up the sides.
Make sure the slots are over the sink when emptying the
bucket.
Caution
• Do not allow water to sit for long periods in the water
bucket. Empty and dry out the bucket when not using
Humid Purify mode.
• When operating the product in Humid Purify mode,
empty the bucket at least once a day or after each use.
Refill with clean water once a day or before each use. If
water is left in the bucket, it may contaminate the bucket,
and even refilling with clean water will not prevent odor
issues.