Electrical Installation - Delta NMT LAN Series Installation And Operating Manual

• Misconnection or overload could cause pump shutdown or
even permanent damage.
• Pumps might be heavy. Provide yourself help if needed,
• Pump must not be used in the safety pipelines,
• Pump should not be used as a holder during welding!
• When reassembling, care should be taken to ensure seal
fit. Failing that, water could cause
internal parts,
• Drains between pump motor housing and hydraulic housing
must be left free (shouldn't be thermally insulated), as it
could interfere with cooling and condense drainage,
• Hot medium can cause burns! The motor can also reach
temperatures that could cause injury.
4.2

Electrical installation

FC
Markings
L
230 VAC, electricity power supply
N
PE Safety ground
Ferrite core for High frequencies interfaces compliance.
FC PE, L and N wires should be lead through it (part is in the
package with the cable glands).
Descriptions
-25-
damage to pump