Package Contents - Fritz! WLAN Repeater 300E Configuring And Troubleshooting

Package Contents

LEDs
LED
Power
WLAN
LAN
All
1.3 Package Contents
•
•
•
FRITZ!WLAN Repeater 300E
Condition
flashing
up to 5 LEDs
are lit up
flashing
on
flashing
flashing rapid-
ly
on
on
flashing
FRITZ!WLAN Repeater 300E
one printed quick guide
one network cable (LAN cable)
7
Meaning
No connection with WLAN base station or
searching for WLAN base station
The more LEDs are lit up, the stronger the
signal of the WLAN radio connection be-
tween the WLAN base station and the
FRITZ!WLAN Repeater
FRITZ!WLAN Repeater starts
•
Updating the firmware of the
•
FRITZ!WLAN Repeater
FRITZ!WLAN Repeater is ready for operation
FRITZ!WLAN Repeater adopts WLAN
•
settings
Switching WLAN radio network on or off
•
Performing WPS
•
WPS procedure was aborted: More than
two WLAN devices are performing WPS at
the same time. Repeat the procedure.
The WLAN module of the
FRITZ!WLAN Repeater is ready for operation
A network connection is active to a con-
nected device (network adapter, hub or
switch)
Factory settings are loaded