Canon EOS M200 Advanced User's Manual page 75

Subject movement (whether subjects are still or moving) may not be detected
z
correctly for some subject or shooting conditions.
Scene Intelligent Auto/Hybrid Auto (Fully Automatic)
3
Focus on the subject.
Press the shutter button halfway to
z
focus.
If [D] blinks, use the <D> lever to raise
z
the flash.
You can also focus by tapping a person's
z
face or another subject on the screen
(Touch AF).
Under low light, the AF-assist beam
z
( = 186) is automatically activated if
needed.
For stationary subjects, the AF point is
z
displayed in green when the subject is
in focus. The camera beeps at this time
(< A > mode only). (One-Shot AF)
For moving subjects, the AF point is
z
displayed in blue (< A > mode only) and
tracks subject movement. The camera
does not beep. (Servo AF)
4
Take the picture.
Press the shutter button completely to
z
take the picture.
The image just captured will be
z
displayed for approx. 2 sec. on the
screen.
To retract the flash, push it down with
z
your fingers.
75