Canon EOS M200 Advanced User's Manual page 390

Connecting to a Wireless Remote Control
Still Photo Shooting
Movie Recording
Bluetooth connections consume battery power even after the camera's auto
z
power off is activated.
When you do not use the Bluetooth function, setting [Bluetooth settings] to
z
[Disable] in step 1 is recommended.
390
5
Set up the camera for remote
shooting.
Set [Drive mode] on the [z] tab to [ Q ]
z
( = 137).
In [Remote control] on the [z] tab,
z
select [Enable].
For instructions after the pairing
z
is complete, refer to the BR-E1's
Instruction Manual.