Canon EOS M200 Advanced User's Manual page 410

Responding to Error Messages
22: No response from DNS server
What to check on the camera
On the camera, does the DNS server's IP address setting match the
z
server's actual address?
Set the IP address to [Manual setting]. Then, on the camera, set
B
the IP address that matches the address of the DNS server used
( = 387, = 421).
What to check on the DNS server
Is the power of the DNS server on?
z
Turn on the DNS server.
B
Are the DNS server settings for IP addresses and the corresponding
z
names correct?
On the DNS server, make sure IP addresses and the corresponding
B
names are entered correctly.
Is the DNS server working correctly?
z
Check the DNS server settings to make sure it is working correctly
B
as a DNS server.
If applicable, ask your network administrator to ensure the DNS
B
server is available.
What to check on the network as a whole
Does the network that you are trying to connect to via Wi-Fi include a
z
router or similar device that serves as a gateway?
If applicable, ask your network administrator for the network gateway
B
address and enter it on the camera ( = 421, = 387).
Make sure that the gateway address setting is correctly entered on
B
all network devices including the camera.
410