Send To Screen
A screen to select a destination may be displayed depending on the Web
service.
To register destinations or to specify the settings, you must use a computer.
For more information, refer to the EOS Utility Instruction Manual.
Camera Access Point Mode
Manual IP Address Setup
The items displayed vary depending on the Wi-Fi function.
The [Send to] screen may be displayed.
z
Select the destination from the list of
z
registered destinations.
The procedures for setting up a
z
connection and sending images are the
same as those for other Web services.
Camera access point mode is a connection
mode for connecting the camera directly to
each device via Wi-Fi.
Displayed when [q], [ D ], or [ l ] is
selected in [Wi-Fi/Bluetooth connection].
1
Select [Manual setting].
Select [OK].
z
Wi-Fi Connection via Access Points
387