Canon EOS M200 Advanced User's Manual page 485

Remote control shooting is not possible.
When taking still photos, set the drive mode to [ Q ] ( = 137). When
z
recording movies, set [z: Remote control] to [Enable] ( = 237).
Check the position of the remote control's release timing switch.
z
If you are using Wireless Remote Control BR-E1, see = 193, = 389.
z
A white s or red E icon is displayed during still photo shooting.
It indicates that the camera's internal temperature is high. Image quality
z
of still photos may be worse when a white [s] icon is displayed. If the
red [E] icon is displayed, it indicates that the shooting will soon stop
automatically ( = 194).
During movie recording, the red E icon is displayed.
It indicates that the camera's internal temperature is high. If the red [E]
z
icon is displayed, it indicates that the movie recording will soon stop
automatically ( = 242).
[ ] is displayed.
[ ] may be displayed after repeated movie recording, or if you keep the
z
camera standing by for movie recording over extended periods (except
when set to L6/L5).
The camera turns off automatically in approx. 3 min. if you continue
recording while [
automatically while standing by for movie recording when [
displayed. Turn off the camera when [
the camera to cool down.
The date/time/zone must be set to enable normal camera temperature
z
control. Once the date/time/zone are set, temperature warnings can be
displayed correctly.
If [Overheated! Shutting down.] is displayed, turn off the camera and
z
wait at least 3 min. Note that the camera should be off for 9 min. or more
if you will record a 4K movie up to 9 min. 59 sec. or a high frame rate
movie up to 7 min. 29 sec. (Actual movie recording times may be shorter,
depending on the recording environment and conditions of use.)
] is displayed. The camera may also turn off
Troubleshooting Guide
] is displayed, and wait to allow
] is
485