Programming; General - Busch-Jaeger 6412-101 Manual

Programming

6.1 General

In general, the following apply when programming:
- Blinking symbol/figures show the current settings.
- Change the settings via the pushbutton NEIN; if neces-
sary, press the NEIN button repeatedly until the desired
value appears.
- Confirm this value by pressing the JA button. Either the next
setting will then be activated or there will be a direct change
to the mode of operation previously selected.
- You can delete the set operating times when program-
ming by holding the NEIN key down for at least 3 secs.
- During programming, the pushbutton
"cancel".
NOTE
Deviating from this, the time and date are set via
the and
To ensure clarity, blinking symbols, letters and/or figures in
the display readout will be shown in
Instructions.
pushbuttons.
•
has the function
grey in these Operating
GB
116