To Program Intermediate Position - Busch-Jaeger 6412-101 Manual

Programming

6.8 to program Intermediate Position

You can program an intermediate position which is com-
piled from the DOWN travel time (L = operating time) and
reverse travel pulse (U = reversing time). This intermediate
position will always only be activated if an UP command
(3 minutes) is previously executed. The subsequent DOWN
travel command (extension, time program, or manual op-
eration) uses the programmed time.
• In one of the three modes of operation, hold the
button down for three seconds.
l3 : 00
• Press the
ing time.
• Press the JA pushbutton to confirm the operating time
set.
The current operating time appears
in the display.
or pushbutton to set the desired operat-
GB
•
push-
144