Further Functions For Blinds Control Ii; Sun-Protection Function - Busch-Jaeger 6412-101 Manual

Programming

6.6 Further functions for blinds control II

If a sun sensor is connected to the blind control, you can
change, or switch off, the values for the sun protection and
dusk function in the operating element.
The light sensor constantly executes measurements and
transmits the ACTUAL value to the operating element
- ACTUAL value
- SETPOINT value
- 1 bar
6.6.1 Sun protection function
Please refer to the Operating Instructions for the flush-
mounted insert for a description of the sun protection
function.
The values are allocated as follows:
- value from 1–9:
- "OFF"
If the set sun value is exceeded, the symbol
display.
= bar display (
( : 5000 to 50,000 lux )
= digital display
= digital display 1(= dark)
( 5000 to 50,000 lux )
no sun protection function
GB
: 15 to 300 lux )
blinks in the
139