To Switch Over From "1-Day To 7-Day Timer - Busch-Jaeger 6412-101 Manual

Programming
6.2.2.2 To switch over from "1-day timer" to "7-day timer"
• Press the NEIN pushbutton three times.
• Press the JA pushbutton once to confirm what you have
chosen.
1 2 3 4 5 6 7
• Press the NEIN pushbutton repeatedly until the desired
weekday (e.g., 3 = Wednesday) is shown in the display
(figure on the right!)
• Press the JA pushbutton to confirm the input.
You now have the opportunity to put in a date to activate the
astro function. If you do not want to do this, press the NEIN
pushbutton once and then press the JA pushbutton repeat-
edly until the mode of operation set again appears in the
display. The operating element is now ready for operation
as "seven-day timer". The switching times of the "seven-
day timer" will be taken over as daily switching times.
Refer to 6.2.1.3 to activate the astro function.
GB
3
125