Fault Elimination/Waste Disposal - Busch-Jaeger 6412-101 Manual

Fault Elimination
8.2 Fault Elimination
Diagnosis
Operating times are
not executed or ex-
executedat a later time: - Check programming and
No display readout
of "sun/moon"
and bar chart
(see Fig. 2, Pos. 7, 8):
Motion command is not - Check run time or reversing
executed completely:
8.3 Waste Disposal
All packaging materials and devices from Busch-Jaeger are
provided with markings and test signets to ensure proper
and workmanlike disposal. Dispose of the packaging mate-
rials and electrical device and/or their electrical compo-
nents via authorized collecting points and/or waste dis-
posal facilities.
Possible Cause/Remedy
- Set automatic mode
- Vacation mode active/exit
astro function
- Check connection and
installation of the brightness
sensor
time (see chapter 6.8)
GB
148