To Cancel Switching Commands - Busch-Jaeger 6412-101 Manual

Programming
• You can now view one switching time after the other by
pressing the pushbutton.
After all programmed switching commands were visible
in the display, the blinking "?" appears again in the display.
• Press the JA pushbutton to view the switching com-
mands once again,
or
• Repeatedly press the NEIN pushbutton until you are
back in the main menu.

6.5.2 To cancel switching commands

A command can be deleted by means of a switching
command inquiry:
• Press the NEIN pushbutton for approximately 3 secs.
-- : --
The dashes appear in the display for one second, after
which the next switching command, or the "?" is displayed.
GB
138