Adjusting The Device; Programming Mode 1 - Busch-Jaeger 6465 U-101 Quick Start Manual

Short-time timer insert
Pos: 17 /#Neustruktur#/Modul-Struktur/Online-Dokumentation/Überschriften (--> Für alle Dokumente <--)/2. Ebene/G - L/Geräteeinstellungen @ 18\mod_1302768847744_15.docx @ 103548 @ 2 @ 1
4.3

Adjusting the device

Pos: 18 /DinA4 - Anleitungen Online/Inhalt/timer-controler-Jalousiesteuerung/6465/Geraeteeinstellungen - 6465 @ 23\mod_1336985633995_15.docx @ 209340 @ 333 @ 1
The timer can be set via two programming modes.
In programming mode 1 the timer is set manually.
In programming mode 2 the timer is set via a preselection of fixed values.
4.3.1

Programming mode 1

1x
START
OK
1:00
0:00
00
Fig. 3: Programming mode 1
To program the timer carry out the following steps:
1. Press the "Programming mode" button once.
- The timer changes to programming mode 1.
- The hour display will flash.
2. Set the hours via the arrow keys.
3. Confirm the entry with the "OK" button.
- The minute display will flash.
4. Set the minutes via the arrow keys.
5. Confirm the entry with the "OK" button.
– The seconds display will flash.
6. Set the seconds via the arrow keys.
7. Confirm the entry with the "OK" button.
The timer is ready to start.
| 1473-1-7950
1 1
OK OK
1: 45
00 00
1
START
OK OK
1:45 1:45
45 45
Operation
2x
OK
0:00
00
— 5 —