To Set Sun-Protection Function - Busch-Jaeger 6412-101 Manual

Programming
6.6.3 To set the sun protection function
• Press the NEIN pushbutton four times to select pro-
gramming for the light values.
• Press the JA pushbutton to confirm your choice.
• Press the JA pushbutton to confirm this.
-- :
• Press the
• Confirm with the JA pushbutton. The timer changes into
the main menu and is ready for operation.
NOTE: The sunshade function is only active if the unit has
been previously run up for 3 minutes.
The symbol
display.
-4
or buttons to set the desired sun value.
blinks in the
GB
141