Machine Features; Technical Data; Pictograms; Intended Use - Festool DOMINO DF 500 Q Original Operating Manual

DF 500 Q
Dowel jointer
Table of contents
1 Machine features ...................................... 12
2 Technical data .......................................... 12
3 Pictograms ................................................ 12
4 Intended use ............................................. 12
5 Safety instructions .................................... 12
6 Power supply and start-up ....................... 15
7 Machine settings ....................................... 15
8 Working with the machine ........................ 16
9 Maintenance and care ............................... 17
10 Accessories, tools ..................................... 17
11 Environment .............................................. 17
12 Example applications ................................ 17
13 Fault correction ......................................... 18
1

Machine features

[1-1] ON/OFF switch
[1-2] Rotary switch for Domino dowel-hole width
[1-3] Unlocking device for motor unit / guide
frame
[1-4] Auxiliary handle
[1-5] Clamping lever for angle guide
[1-6] Selection slide for material thickness
[1-7] Notch lever for Domino dowel-hole depth
[1-8] Notch lever lock
[2-1] Spindle lock
[2-2] Extraction nozzle
[2-3] Clamping lever for jointing height adjust-
ment
[2-4] Stop latch
The specified illustrations can be found at the
beginning of the operating instructions.
2

Technical data

Power
Speed (no load)
Jointing depth, max.
Jointing width, max.
Jointing bit diameter, max.
Connecting thread of drive shaft
Weight (excluding cable)
Degree of protection
3

Pictograms

Note, Danger!
Wear ear protection!
Wear protective goggles!
12
420 W
25 500 min -1
28 mm
23 mm + jointer bit
diameter
10 mm
M6 x 0.75
3.2 kg
/ II
Manual, read the instructions.
Wear a protective mask!
4

Intended use

The Domino dowel jointer is designed to produce
Domino dowelled joints in soft and hard wood, chip
board, plywood and fibre boards. All applications
beyond this are regarded as unspecified use.
The Domino dowel jointer is designed and ap-
proved for use by trained persons or specialists.
The user is liable for damage and injury
resulting from incorrect usage!
5

Safety instructions

5.1 General safety instructions for power
tools
WARNING
tions, other instructions and technical data
provided with this power tool, and take a look at
the illustrations. Failure to observe the following
instructions may lead to electric shocks, fires and/
or serious injuries.
Keep all safety and other instructions in a safe
place for future reference.
The term "power tool" used in the safety instruc-
tions refers to mains-powered power tools (with
power cable) and battery-powered power tools
(without power cable).
1 OCCUPATIONAL SAFETY
a. Keep your working area clean and well-lit. Un-
tidy, unlit working areas may lead to accidents.
b. Do not operate the power tool in a potentially
explosive environment containing flammable
fluids, gases or dust. Power tools generate
sparks that may ignite dust or vapours.
c. Keep children and other persons away from
the power tool during use. If you are distracted,
you may lose control of the tool.
d. Never leave the power tool unattended. Only
leave the power tool when the insertion tool has
come to a complete halt.
2 ELECTRICAL SAFETY
a. The connector plug on the power tool must fit
in the socket. The plug must not be modified
in any way. Do not use adapter plugs together
with earthed power tools. Unmodified plugs
and compatible sockets reduce the risk of
electric shock.
Read all safety instruc-