Makita DUR361U Technical Information page 6

R
epair
[3] DISASSEMBLY/ASSEMBLY
[3] -1. Shaft pipe complete (cont.)
ASSEMBLING
(4) Assemble Shaft pipe complete to Motor section. (Fig. 7)
Fig. 7
1. Pass power supply cord unit through the hole of Cushion on Shaft pipe complete.
hole of Cushion
2. Assemble Shaft pipe complete to Motor section with M5x16 Pan head screw and M5x20 Hex socket
head bolt while aligning the following parts to the joint of Housing set.
* Slit of screw acceptance of Hanger
* Center groove of Handle holder 2
Joint of Housing set
power supply cord unit
Shaft pipe complete
M5x16 Pan head screw
Slit of Screw acceptance
of Hanger
M5x20 Hex socket head bolt
Center groove of Handle holder 2
P 6/ 16