R
epair
[3] DISASSEMBLY/ASSEMBLY
[3] - 4. Rotor, Stator (cont.)
DISASSEMBLING
(4) Disassemble Rotor and Stator from the Motor section. (Fig. 14)
Fig. 14
1. Unscrew three 4x18 Tapping screws, then remove
Motor housing (R). And then, separate Stator and
Rotor from Motor housing (L).
Motor
housing (R)
Caution for Handling of Rotor
When handling or storing multiple Rotors, be sure to keep a proper distance between Rotors as shown in Fig. 15
because Rotor is a strong magnet, failure to follow this instruction could result in:
• Finger injury caused by pinching between Rotors pulling each other
• Magnetic loss of Rotors or damage on the magnet portion of Rotor. See Fig. 16.
Fig. 15
enough
distance
Stator
Rotor
Motor
housing (L)
2. Push the shaft end of Rotor against workbench
and slide Stator toward workbench.
Then pull out Rotor from Stator.
Rotor
Fig. 16
P 11/ 16
Stator
* Magnetic loss of Rotors
* Damage on the magnet
portion of Rotor