Page 2
Dear Thank you for choosing a Hanna Instruments product. Preliminary Examination ............Intended Use ............... Please read this instruction manual carefully before Customer, General Description ..............using this meter. HI93501 Specifications............This manual will provide you with the necessary HI935001 Specifications............
Page 3
If there commerce. Many aspects of safe food handling require the accurate is any damage, contact your local Hanna Instruments Office. measurement of temperature. Food service, food preparation, packaging, storage and transport of food require temperature Each meter is supplied complete with: to be monitored or controlled.
±0.2 °F (‑58.0 to 302.0 °F) @ 23.0°C ±5°C • Waterproof casing IP65 ±0.3 °C (‑10.0 to 80.0 °C) Probe Accuracy HI93501 ±0.5 °F (14 to 176 °F) FC762PW ±0.7 °C / ±1.3 °F remaining range 1.5V AAA (3 pcs.) Battery type / life approx.
Page 5
Main features: ‑50.0 to 199.9 °C ; 200 to 300 °C Range* • FC766PW K‑type thermocouple probe ‑58.0 to 399.9 °F ; 400 to 573 °F • Calibration Check feature 0.1 °C (‑50.0 to 199.9 °C) • Remaining battery life indication/low battery detection 1 °C (200 to 300 °C) Resolution •...
Page 6
Main features: ‑50.0 to 199.9 °C ; 200 to 300 °C Range* • EN 13485 compliant ‑58.0 to 399.9 °F ; 400 to 573 °F • FC767PW T‑type thermocouple probe 0.1 °C (‑50.0 to 199.9 °C) • Calibration Check feature 1 °C (200 to 300 °C) Resolution •...
Page 7
Main features: ‑50.0 to 199.9 °C ; 200 to 300 °C Range* • Fixed K‑type thermocouple probe ‑58.0 to 399.9 °F ; 400 to 573 °F • Calibration Check feature 0.1 °C (‑50.0 to 199.9 °C) • Remaining battery life indication/low battery detection 1 °C (200 to 300 °C) Resolution •...
Page 8
Main features: ‑50.0 to 199.9 °C ; 200 to 300 °C Range* • EN 13485 compliant ‑58.0 to 399.9 °F ; 400 to 573 °F • Fixed T‑type thermocouple probe 0.1 °C (‑50.0 to 199.9 °C) • Calibration Check feature 1 °C (200 to 300 °C) Resolution •...
Page 9
Connect a suitable temperature probe to the meter (see page All the models are provided with an automatic CAL Check 21 for a complete list of Hanna Instruments probes). feature at start‑up, which allows the user to check the meter...
±0.3 °C, then an “Err” message is displayed. 8 minutes 60 minutes Disabled Contact your local Hanna Instruments Office for recalibration. Each model is provided with an auto‑off feature, which switches the meter off after a certain period of non‑use, to save battery life.
BATTERY REPLACEMENT All Hanna Instruments temperature probes are pre‑calibrated at the factory and are ready‑to‑use. These interchangeable probes When the remaining battery life is less make it possible to switch from one probe to another within the than 10% the battery tag blinks on the family without requiring recalibration.
When shipping any meter, make sure it is properly packed for complete protection. Hanna Instruments reserves the right to modify the design, construction or appearance of its products without advance notice. MAN93500X 11/17...
Page 13
World Headquarters Hanna Instruments Inc. Highland Industrial Park 584 Park East Drive Woonsocket, RI 02895 USA www.hannainst.com Local Office Hanna Instruments Inc. Highland Industrial Park 584 Park East Drive Woonsocket, RI 02895 USA Phone: 800.426.6287 Fax: 401.765.7575 e‑mail: tech@hannainst.com MAN93500X...