Refitting the glass panels
Step. 1
Refit the third pane and spacer.
Then refit the second pane
carefully.
Step. 2
Refit the black printed pane.
The print should face in
towards the middle pane.
Note : Individual panes must
be located correctly in their
retainers.
Step. 3
Finally refit the top cover by securing the screws onto the door.
Note : Clean the glass panels with a mild detergent. Do not use
harsh abrasive cleaners or sharp metal scrapers to clean
the oven door glass since they can scratch the surface,
which may result in shattering of the glass.
97