Setting method
the other conditions. When you want to set date into
mode.
Curve setting examples
The screens shown below are curves created by entering
the pitch angle at low, center, and high side 3 points or 5
points at each condition. They were created by reducing
the number of points to the 3 points of low side, center,
and high side. When actually creating a curve, input the
Curve
Normal Curve
< Model Menu (Helicopter Functions) >
164
ample
Idle-up 1 Curve
by a bold line.
currently in use is also displayed.
*For a description of the curve setting method, see the description at
the back of this manual.
Idle-up 2 Curve
Hold Curve
■