Table of Contents
Advertisement
Controlling the Main Camera
Moving / zooming camera
To control the Main Camera use the keys below:
for pan/tilt and
OK
NOTE
Focusing camera
The Main Camera is set to autofocus by default. If the Main Camera is moved (pan/tilt/zoom), autofocus will be
switched On automatically for 5 seconds.
To manually focus the Main Camera, see 'Video Settings' in 'Advanced use'.
Selecting video sources
main cam
aux
doc cam
Press:
NOTE
W
HEN SELECTING THE DOC CAM OR PC VIDEO SOURCES THE SYSTEM WILL AUTOMATICALLY REQUEST FLOOR WHEN CONNECTED TO A
M
S
CONFERENCE AS
ULTI
TANDBERG Videoconferencing System
zoom
for zooming.
I
,
F THE MENU SYSTEM IS ACTIVE
THE ARROW KEYS WILL NAVIGATE IN THE MENUS
vcr
pc
to select the video source to be transmitted to the far end.
ITE HOST OR CONNECTED TO AN EXTERNAL
MCU.
35
General use
.
MCU
Advertisement
Table of Contents
