Web-Interface; Tandberg Videoconferencing System - TANDBERG Video Conferencing System 7000 User Manual

Tandberg 7000 video conferencing system user manual
Table of Contents

Advertisement

Web-interface

It is possible to access and maintain the system remotely via a local area network (LAN) using a standard Web-
browser.
Connect your system to a local area network.
Configure your codec:
• Press MENU, select 'Terminal Settings', 'LAN Settings'
• Specify IP-assignment 'DHCP' or 'Static'. If DHCP is selected no other settings are needed. If Static is
selected, 'IP-address', 'IP-subnet mask' and 'Gateway' must be specified.
Example:
IP-assignment:
IP-address:
IP-subnet mask:
Gateway:
See 'LAN Settings' in 'Advanced use' for further information.
• Start your Web-browser. In the address field type the IP-address of the codec. Enter the password and the
Web-page of the codec will be shown. The default password is 'TANDBERG'.

TANDBERG Videoconferencing System

Static
196.9.200.129
255.255.255.0
196.9.200.21
47
LAN
T
HE SYSTEM MUST BE RESTARTED BEFORE CHANGES IN THE
NOTE
'LAN S
'
ETTINGS
MENU CAN TAKE EFFECT
General use
.

Advertisement

Table of Contents
loading

Table of Contents