Table of Contents
Advertisement
TANDBERG Videoconferencing System
Advanced use
Dataport 2
Dataport 2 is dedicated to the main camera and will not be available in standard configuration.
The Codec will automatically detect WAVE cameras. If you are using a camera supporting the VISCA protocol,
select 'Mode: VISCA'. The Dataport 2 settings will then be enabled.
If 'Mode: Auto' and no camera is connected to the Dataport 2, the Baudrate, Parity, Databits and Stopbits
settings will be enabled.
For more details on connecting to the Dataport, see 'Peripheral Equipment'.
97
Advertisement
Table of Contents
