ALDI FERREX CLM80XA User Manual page 8

operator. Always ensure that both hands are in the operating position
before returning the lawnmower to the ground.
m) Do not put hands or feet near or under rotating parts. Keep clear of the
discharge opening at all times.
n) Not to touch the blades before the disabling device has been removed
and the blades have come to a complete stop.
o) Do not start the lawnmower when standing in front of the discharge
opening.
p) Do not transport the lawnmower while the power source is running.
Never pick up or carry the lawnmower while the motor is running.
q) To remove the disabling device
– whenever leaving the machine unattended;
– before clearing a blockage;
– before checking, cleaning or working on the machine;
– after striking a foreign object, Inspect the machine for damage and
make repairs before restarting and operating the lawnmower.
If the lawnmower starts to vibrate abnormally (check immediately)
- inspect for damage;
- replace or repair any damaged parts;
- check and tighten any loose parts.
Maintenance and storage
a) Keep all nuts, bolts and screws tight to be sure the equipment is in safe
working condition;
b) Check the grass catcher frequently for wear or deterioration;
c) Replace worn or damaged parts for safety. Use only genuine replace-
ment parts and accessories.
d) Be careful during adjusting of the lawnmower to prevent entrapment of
the fingers between moving blades and fixed parts of the lawnmower.
e) Always allow the lawn mower to cool down before storing.
f) When servicing the blades be aware that, even though the power
source is switched off, the blades can still be moved.
MODEL No.: CLM80XA, PRODUCT No.: 10094
6