Base Plate - Janome AirThread 2000D Service Manual

Base plate

Hinge screw
Hinge screw
Rubber sole (unit)
Setscrew
Base plate
Replacing External Parts
Rubber
sole (unit)
Rubber
sole (unit)
Hinge screw
6
Base plate
To remove:
1. Open the side cover.
2. Remove the hinge screw (3 pcs.) and remove the
rubber soles (unit).
3. Remove the setscrew.
4. Remove the base plate.
To attach:
Follow the above procedure in reverse.
MODEL: AirThread 2000D