To Adjust The Height Of The Rubber Sole (Rear Left) - Janome AirThread 2000D Service Manual

To adjust the height of the rubber sole (rear left)

The adjustable rubber sole (rear left) is 0.6 mm higher (above the level) than the other 3 rubber soles.
Adjusting screw
Mechanical Adjustment
To check:
1. Place the machine with the rear cover down.
2. Insert a screwdriver into the slit of the adjusting screw
3. Place the machine upright. Check if the 4 rubber soles
37
of the real left rubber sole. Tighten the screw and
loosen the screw by a quarter rotation.
The height should be 0.6 mm above the level of the
other 3 rubber soles.
are level. Check the vibration of the machine while
running.
MODEL: AirThread 2000D