Janome AirThread 2000D Service Manual page 41

To replacing the motor (1)
Setscrew A
Machine socket cover
Machine socket
Setscrew B
Motor terminals
Machine socket
Replacing External Parts
Belt
Motor pulley
Setscrew B
Machine socket cover
Nut
Motor (unit)
To remove:
1. Remove the belt cover, the rear cover and the
machine socket (unit).
2. Remove the setscrews A (2 pcs.).
3. Remove the motor.
4. Remove the setscrews B (2 pcs.).
5. Remove the machine socket cover.
6. Remove the nuts.
7. Remove the motor terminals from the machine socket.
To attach:
1. Connect the motor terminals to the machine socket.
2. Tighten the nuts.
3. Attach the machine socket cover to the machine
socket.
4. Tighten the setscrews B (2 pcs).
5. Tighten the setscrews A (2 pcs.) to fix the motor on
the arm.
39
MODEL: AirThread 2000D