To Replace The Led - Janome AirThread 2000D Service Manual

To replace the LED

Cord guide
Motor
Replacing External Parts
Connector (LED)
Cord binder
LED holder
Cord binder
LED cord
To remove:
1. Remove the top cover, the face plate, the belt cover,
the front cover, the rear cover and the machine socket
(unit).
2. Remove the connector (LED) from the machine socket
(unit).
3. Open the LED holder and remove the LED.
4. Cut the cord binders (2 pcs.and remove the LED cord
from the rear cord guide.
To attach:
1. Insert the LED in the LED holder and close the hook.
2. Insert the LED cord in the rear cord guide.
3. Insert the LED connector in the machine socket (unit).
4. Fix the LED cord on the arm with the cord binders (2
pcs.).
5. Place the machine socket (unit) under the motor (unit).
6. Attach the machine socket (unit).
7. Attach the top cover, the face plate, the belt cover, the
front cover and the rear cover.
41
MODEL: AirThread 2000D