Front Cover - Janome AirThread 2000D Service Manual

Front cover

Setscrew A
Upper looper
Setscrew A
Looper cover position detecting arm
Setscrew C
Setscrew C
Replacing External Parts
Handwheel
Front cover
Looper threader lever
Setscrew B
Front cover
To remove:
1. Remove the top cover, the face plate, the belt cover,
the base plate and the looper cover.
2. Set the upper looper to the lowest position by turning
the handwheel toward you.
3. Remove the setscrews A (2 pcs.).
4. Loosen the setscrew B.
5. Loosen the setscrews C (2 pcs.).
6. Raise the looper threader lever halfway.
7. Set the looper cover position detecting arm to the right
and remove the front cover.
To attach:
Follow the above procedure in reverse.
* Make sure that set the front cover into the catch of the
looper cover position detecting arm.
8
MODEL: AirThread 2000D