CHANGING EXTERNAL PARTS
FRONT COVER
To remove:
1. Remove the face cover and bed cover (Refer to pages 4 and 5).
2. Remove the setscrews q (2 pcs.).
3. Loosen the setscrew w.
4. Loosen the setscrew e.
5. Loosen the setscrew r.
6. Remove the setscrew t.
7. Disengage the front cover and rear cover hooks.
8. Remove the front cover y.
9. Disconnect all the connectors from the circuit board A.
NOTE:
Do not disconnect the connectors by pulling cords. To disconnect, grasp the connector, not the cord.
To attach:
9. Follow the above procedures in reverse. See "PRINTED CIRCUIT BOARD A CONNECTION" (Page 23).
q
w
y
t
e
r
6