Operation - Westfalia 12 86 52 Instruction Manual

Operation

The best mounting position is a corner of the room with the device
pointing on the opposite wall or corner or uncovered window or
panes of glass. The reflection of the sound waves on flat walls or
objects helps to distribute the sound in the entire room.
The device effectively treats an area up to ca. 200 square meters
(approximately 2150 square feet) with ultrasound, so that a cleverly
mounted device even is sufficient for very big rooms.
Please note that textiles such as curtains, upholstered furniture,
textile wallpapers or other objects with an uneven surface will
deaden the sound waves or absorb them completely. Therefore, it is
recommended to select a mounting position where the sound waves
are reflected by a flat object on the opposite side of the room.
1. Connect the bracket (2) with the mount (4) and the laterally
holding pins (3).
2. Mount or place the device close to a power socket. You can
either mount the device on a wall or ceiling using the included
bracket (2) or place it simply on a tall cabinet.
3. To mount the device on the wall you can use the enclosed
screws and dowel pins. Find the correct position and then fix it
on the wall or the ceiling.
4. Adjust the angle and direction of radiation using the locking
bracket.
whereabouts of the pests.
5. Firmly connect the included power adaptor with the input (6) at
the rear of the unit and a power socket. If the device works the
LED indicator (1) at the front side of the device lights up.
6. To check whether the device produces sounds, disconnect the
adaptor from the power socket. You hear a short whistling noise,
if the device works properly.
Direct the
Operation
device towards the
7
most favoured