Table of Contents
Advertisement
Operation
Operation
Plug the unit into an extension cord which is plugged into the power mains.
Place the blades on the ground where you intend to treat the soil, and hold the
unit firmly. Now press the safety button (2) at the side of the handle and then
the ON/OFF switch (1). The blades will now start to rotate and dig into the soil.
Slowly pull the unit through the ground in your direction and loosen the ground
in parallel strokes with the rotating blades. During operation be extra careful
not to injure your feet.
Cleaning and Maintenance
Before undertaking any work on the unit, pull the power plug.
Use a stiff brush and a moist cloth to clean the unit; do not use aggressive
chemicals or abrasives to clean the unit. Do not allow liquids of any kind to
enter the unit.
The unit does not contain parts serviceable by you. Do not disassemble it and
do not attempt to repair it yourself.
In the case of problems, please contact our customer support department.
5
Advertisement
Table of Contents
