Removing The Telescopic Pole; Operation - Westfalia Garten Meister HEA 710-3D Original Instructions Manual

Attention: Operating the pole saw with two telescopic
poles is not permitted! The stability of the pole saw is
not guaranteed and there is risk of severe injury and
damage to the pole saw.

Removing the Telescopic Pole

To remove the telescopic pole
from the pole saw (e.g. for
space-saving
storing), depress the unlock
buttons on both sides and pull
out the telescopic pole.

Operation

1. Check the oil level and connect
the power plug to power mains.
2. To switch on the pole saw, first
depress the safety switch (8) and
then press the trigger switch (9).
Then, release the safety switch.
3. To switch off the pole saw,
release the trigger switch (9).
 Please note that the machine will
still run for some seconds.
 While cutting, make sure the oil level does not run out; refill in
time.
Operation
transport or
8
44
8
9