Table of Contents
Advertisement
Installing the Oil Bottle and Fuser Cleaning Roller
The oil is used for fixing the toner on the paper. The fuser cleaning roller
removes any accumulated dust from the fusing unit.
Caution!
Always keep the printer horizontal to prevent spillage of
residual oil and toner.
Note:
After replacing the fuser cleaning roller, reset the fuser cleaning roller counter to
zero.
Chapter 2 Setting Up Your Printer
1. Release the top cover latch and
open the top cover.
2. For the T8006e, push the large
green levers at the sides of the
fuser rollers backward until they
click into position.
3. Insert the oil bottle.
4. Insert the fuser cleaning roller.
5. Turn the two green lock levers to
lock the fuser cleaning roller and
the oil bottle in place.
13
Advertisement
Table of Contents
