Accessories - Vermeiren Altitude XXL Instruction Manual

1.4

Accessories

The following accessories are available for the ALTITUDE XXL, CORAILLE XXL:

TREATMENT TABLE (B12)
If, while using your shell chair, you want to enjoy the possibility of taking your meals, writing
or performing other activities that require a working surface, we offer a treatment table –
featuring a cut-out for your abdomen (B12) – that can be lowered down to the side if not
required, or placed on the armrest cushions by inserting the guide located under the shell
chair into the sockets provided to that intent.
2
1
2
l
A plastic washer must be placed between the table and the B12 supports. When the
treatment table is removed, take care that you do not lose the washer.
l
Use the table only when seated in the upright position.
l
For proper use of the treatment table (B12): please note that the fitting can only be
attached to the right side of the chair.
l
Before using the table, make sure that all screws have been tightened properly.
l
To prevent injury and/or damage, make sure that no objects or body parts could be
compressed between the table and the armrest cushion.
l
To avoid injury and/or damage there should be no persons and/or objects on the right
side of the shell chair when the board is lowered.
l
When using or lowering the treatment table, the immobilizers must be engaged to
prevent the chair from moving on its own as a result of the movements on the chair
as this might cause injury and/or damage.
l
Only your specialist dealer should be allowed to fit these accessories – only he has
suitable tools and required expertise.
l
Your warranty claim will be voided in the case of injury and/or damage due to
unauthorized persons having improperly fitted the accessories.
1
2
3
3
Page 6
ALTITUDE XXL, CORAILLE XXL
Insert the B12 support into the sockets
provided to this intent on the underside
of the frame.
Secure the support to the underside of
the frame with the fixing screws.
Insert the floating axle from the front
through the table sockets and then
through the B12 support. (To set the
table closer to your body, the floating
axle could also be inserted first through
the B12 support and then through the
table support).
2018-09