Negotiating Steps; 2.10 Transport In The Car; Installation And Adjustment; Tools - Vermeiren Altitude XXL Instruction Manual

Table of Contents

Advertisement

2.9

Negotiating steps

2.9.1 Using ramps
L
WARNING:
Risk of tipping over – Never go up or down ramps without the aid of a
helper.
If you are considering the installation of ramps to overcome obstacles, kindly note the
following:
The chair is intended firstly and mostly to be used inside on level and solid surfaces. Never
go up or down ramps that are rough or have bumpy edges. Limit yourself to ascents or
descents with a maximum angle of 6%.

2.10 Transport in the car

L
WARNING:
Risk of injury – See that the chair is attached properly. So you can
avoid injury from the passengers during collision or sudden braking.
L
WARNING:
Risk of injury – Use for attaching the chair and passenger NEVER the
same seatbelt.
L
WARNING:
Risk of injury – Never let anyone sit in the shell chair while you are
transporting it in a private vehicle (not to use as a seat in a motor vehicle).
1.
Remove accessories.
2.
Store footrests and accessories safely.
3.
If possible, fold the chair.
4.
Place the chair in the luggage place.
5.
If the chair and the passenger compartment is NOT separated, attach the frame of
the chair securely to the vehicle. You can use the available safety belts in the vehicle.
3

Installation and adjustment

The instructions in this chapter are for the specialist dealer.
To find a service facility or specialist dealer near you, contact the nearest Vermeiren facility.
A list of Vermeiren facilities can be found on the last page.
L
WARNING:
Risk of unsafe settings - Use only the settings described in this
manual.
L
WARNING:
Variation of allowed adjustments can still change the stability of your
product (tilt back or sideways).
3.1

Tools

To set up the chair the following tools are needed.
Allen key set n° 4
ALTITUDE XXL, CORAILLE XXL
Page 13
2018-09

Advertisement

Table of Contents
loading

This manual is also suitable for:

Coraille xxl

Table of Contents