Technical Specifications - Vermeiren Altitude XXL Instruction Manual

1.2

Technical specifications

Technical terms below are valid for the product in standard settings.
If other footrest or other accessories are used, the tabulated values will change.
Make
Address
Type
Model
Maximum occupant mass
Description
Overall length with legrest
Effective seat width
Overall width (depends on the seat
width)
Overall height
Total mass
Static stability downhill
Static stability uphill
Obstacle climbing
Seat plane angle
Effective seat depth
Seat surface height at front edge
Backrest angle
Backrest height
Distance between footrest and seat
Angle between seat and footrest
(seat inclination is horizontal)
Armrests height
Storage and use temperature
Storage and use humidity
We reserve the right to introduce technical changes. Measurement tolerance ± 15 mm / 1,5 kg / °
The frame of the ALTITUDE XXL / CORAILLE XXL shell chair is made of aluminum. The
shell chair is made of a composite synthetic material and the cover of pressurized plastic
foam. The use of bilastic covers increases adaptability of the seat to the user. However, an
imitation leather cover is also available. The footplates have been made of high-resistance
ABS synthetic material.
The angle of the shell and the leg supports can be adjusted by means of a pneumatic
cylinder.
The seat cushions come in different thicknesses, with the SOFT version also made of
pressurized plastic foam and a bilastic cover. An imitation leather cover will be supplied on
request.
Vermeiren
Vermeirenplein 1/15, B-2920 Kalmthout
Shell chair
ALTITUDE XXL / CORAILLE XXL
150 kg
Min.
380 mm 400 mm
570 mm 600 mm
1190 mm
6% (in standard configuration)
6% (in standard configuration)
450 mm
750 mm
350 mm
0°
230 mm
+ 5 °C
30%
Table 1: Technical specifications
Page 4
ALTITUDE XXL, CORAILLE XXL
Standard
1120 mm
420 mm 440 mm
620 mm 640 mm
1215 mm
Approx. 25 kg
Not applicable
-4° to +36°
460 mm
520 mm
90°
770 mm
535 mm
63°
250 mm
+ 41 °C
70%
2018-09
Max.
480 mm
660 mm
1240 mm
560 mm
790 mm
270 mm